AutoCAD Plant 3D Bespoke | Videos

language: EN

                  WEBVTT
Yes guys so check your email the sheet is there and start working on it.
Christopher are you able to access now? Christopher, Arduino and I guess Karen was also having the issue in accessing the system.
This is lesson number five. You can see that?
Yeah, you have not received it yet. Lesson five.
There you can download that or you can open directly. So you will open the five number okay as of now.
Yeah, you can check the same thread Christopher. She has shared on the joining instructions I guess.
Correct Christopher? Okay, alright.
No problem, no problem Jaws.
You can share your screen. Okay no worries.
So anyways everybody will get benefited. They can also see. You can share your screen that would be better actually.
Yeah, you will just. Which one is this? This is G17. This is your project right? The new one you created or the existing one.
Yeah, this is the existing one. Okay, make a new project actually because we need to have the settings otherwise we will not be able to make it properly.
Or you can use any of the project which you created last time. Default G1, G2. No, this project maybe. Project Jaws 001. That is your project.
Yes, now expand it. You have just created it. Alright, that's fine. Yes.
Yes, you have been ID.
But did you placed anything? Nothing. That's okay.
Yes, let's go for the drawing. Close that file first. Close that one that the PN ID first.
In your file tab above your project manager.
Down, down.
You can see us. There you go. Yes. Now right click.
Right click then. Yes, new drawing. Give name. Let's say structure.
Yes.
Okay, okay. Yes. So first of all you will go for the layers. Okay, let's start with the layers.
LA for layers. Everybody else you can also follow the same.
If you are following. Then create new layer. New layer. Then give it name as grid.
And define any color of your choice. Okay.
And make one more for footing. Yes, footing. And then give name.
Sorry, color.
Yeah, your choice.
Okay, nice.
One more. Yeah.
Make for plate. Yes. Then define different color. Even I am not. Okay.
I am not telling you according to those instructions.
Because I just.
You can follow those. That is fine. But yeah.
Otherwise I also have to read.
If we need to follow the instructions. Let me see on your activity. What is there.
So you will do this. Okay, now let's go for the settings. Close it.
Because we can make it later if required.
Close it and activate the grid layer.
Click on grids. Piping. Yes, you should be in 3D piping.
Whenever working in plan 3D. We generally work in two environments. PID and plan 3D.
The drafting annotation is for normal AutoCAD only.
Then activate the layer. Grid layer first of all.
Layers you can see.
You can find the last panel is layers panel.
In your ribbon.
The very last. Yeah. And you can see zero. Yeah, click on the drop down and choose grid.
Yes. Now switch to the structure tab. You are in home tab as of now.
Structure. Third number. Yes. And then go to the settings first of all.
Let us define the setting to your member. Yes.
Then member settings.
Then choose the settings you want.
AISC, CISC whichever you want.
At the top you have the shape standard first of all. You can choose the standard at the top. Top. Top.
Shape standard. Yes.
AISC and then choose.
Yes. Choose the shape you want.
Yes. Yes. Then you will press OK.
And then.
No. That is for like our member setting. Now we will make the grids.
Yes. Now go for the grid.
Yes. And then type the values as zero comma for axis values.
Zero comma four thousand comma eight thousand axis. Yes.
Like you have two values. One in X side and one in Y side. So this is about X.
Yeah. Zero four thousand eight thousand and then row value.
That is. Yeah.
Yeah. That is zero and four thousand only.
Okay. Yes. Yeah. And then the last one is your platform values.
That is your height actually. Correct.
So this one will again be zero comma four thousand.
And then click on those arrow heads in front of it.
It's already fine. This is also fine. The third last. Yeah.
There you go. Yes.
Then you can OK. Create. Yes. Just click on create.
Yes. User coordinate system is fine.
Because our UCS is also placed at the WCSA as of now.
It's not changed.
Yeah. You can name it. Obviously. Maybe guide grids or something like that.
Okay. Okay. That's fine.
Create. See it is there. Yeah.
UCS. Zero one. Yes.
And now once you are done with this then we will go ahead with the member.
So we'll start placing the members. Yes. Yes.
So now I guess okay you can click on the settings again.
We will change the settings now.
See within the command you can do see at the command line window while your command is active.
You have two options line or settings. So these members setting can be changed anytime.
Just click on the settings now within the command.
Not there. Not there. Down in the command line window settings.
Yes. Now choose this W. You have already selected W right.
And choose W 12 by 210.
12 by 210.
Standard. Standard is your
ASTM shape standard.
ASTM. Okay. Click on the list with all options you have.
Yes. And then material code.
Material code A242. Yeah. That's already correct.
Then
Okay. Then hit okay.
Yeah. Then we'll start working on it.
Now specify the start point. Yeah.
Specify 0, 0 at your first corner. Yeah.
Here as well. Anyways we have to create for all the corners.
So start from there. Go up. Yes.
In the line mode. Yeah. Just stay line model.
Later on we will check it. So now make all of them like six columns.
You need to. You just need to activate the command first because you are out of the command.
Once you hit escape key. Yeah. Once we hit escape key.
Like we exit the environment. Yes. Yes.
Shamin you want to say something. Yeah.
Christopher can you try like both of you. Yes.
Hopefully it should work properly now.
Lynette and
Michelson. Just check all of you.
Yes.
Yes. I'm just checking with them.
Whether they got it or not.
Just a moment.
Did you try to exit and connect again.
OK. Can you share your screen for a while.
You can share actually.
Yes. OK. I can see.
I can see Lynette screen now.
Now what you need to do.
Service template is not available.
Can you click on these three dots.
The Eclipses button. Yeah. Click on it again.
Then you will connect to I guess.
Shamin with Z H 7 0.
Yes. Click on connect.
OK. Click on this stop button in front of it for a while.
Stop and then start again. You can see the stop button.
Stop. Lynette. Yeah. Stop. Yes. Loading I guess.
Let it connect.
Yes.
Now it's working fine.
Connect. What about the as we know.
Is it working fine for you now.
Christopher.
Lynette try to close it again.
Yeah. The window. Yeah.
Close the window and this one click on stop again.
And start again. OK.
Now connect again.
Connect again.
Yes.
Now I guess it's responding on time.
Yes. Allow.
And then open the software.
All right Lynette. It's working fine now.
Christopher can you check now.
All do we know. Yes.
Christopher you want to share your screen.
Great. Great Christopher.
So you can start with the activity.
Yeah. All do we know.
Yeah. You can share your screen now.
Anybody else like if you want to share the screen.
Yes. Who want to share the screen.
Josh.
OK. No problem. You can share screen now.
And everybody else will follow.
Yes. So you created all of them.
Now you will change the structure. Yes.
So first of all select.
Select all of them at the top actually. Yes.
And then go for to the properties again.
Right. Yeah. Edit.
Structure edit. And then.
Yeah. AAC.
And then you can choose S.
Yes. S then S 24
by 121.
That is going to be your shape.
And after that you will choose the orientation as middle.
Which is already middle. Middle center.
And then material standard again you can choose that is already STM.
Yeah. All set. OK.
Yes. That we will eventually
that we will do actually.
No. We can directly go for that either.
This is another editing step only just to change
the orientation. So anyways we can keep it at the top.
And then the object will automatically come down.
Yes. Hit OK.
And they will be placed accordingly. Correct. That's correct.
Yes. OK. After that.
Yes. The small beams are there.
You can create a copy of any of the existing object.
I think you undo
by mistake. Use the redo. Control Y.
This happens sometime. Use window selection approach to
select that again. Then the object will automatically
deselect. Shift. Shift and middle mouse button.
Yes. OK.
Yes.
So for intermediate
you can do one thing. You can select the existing
member at the very left. OK. Do one thing.
Just click inside in the blank area
anywhere at the right side. Yeah. There.
Click. Yeah. Click. And then
move your mouse toward left.
Keep moving. Keep moving. Keep moving. Cover everything.
Keep moving. Yes. Select.
Click again. Now hit escape. Keep.
Escape. Now hit escape. That's it. Yeah. Hit escape.
So this is how like in case if some items
are selected and these are not getting deselected. Right.
So means you just need to select it and then
escape so that the items will get deselected automatically.
Now what you will do you can select the member
at the very left side. Extreme left.
Yeah. You can get a copy of this member. Yeah.
You can get a copy of this member. Yeah. At a value
of one thousand three hundred thirty three point
three three millimeters. One triple three point three
three. Now see again here to avoid any
confliction because it will start picking the points. Right.
You can change the visual style first of all.
To your line. Yeah.
Yes. Change this to line
model. Yes. Yes. Yes. Do it.
And then go ahead.
Obviously we'll be out of the command. Now again go
for copy and then select that member.
Only the member. You can see the symbol in between.
Click on it. Yes.
But are you sure the size is correct?
It seems very
big actually.
It should be as twelve by fifty only.
Go for edit. Yeah. No. No.
No. It's not like that. We need to edit the setting for
the one which we already created. Hit escape first.
Because yeah. Now select that member
the beam at the left side. Only
the beam. Then go for the setting.
Structure edit. And here you need to make
sure that its size is as twelve by fifty.
See it says twenty four by one twenty one. That's why
it's too big. It should be one two by
five zero. Yeah. Can you change the visual style
now for a while? Shape model.
As twenty four.
Okay. Yes.
Okay. Do one thing. Undo.
Then why it is so big. And we'll check the column size.
Yeah. Control Z.
And then select the column. Any of the column
which you have placed there.
And then go for the structure edit.
And let's see. It says section is
W. And then W twelve
by two hundred and. Okay then.
Okay fine. Maybe visuals are
little different. Okay.
Now create a copy of that member.
Yes. Yes.
Better. Better. Yeah.
Copy. Then just move your mouse there
and then type one three three three point
three three. One triple three point
double three. Then enter. No. Actually
your polar is not active. That's why. I don't know where it is
I'm going to create it. Activate the polar or
ortho from your status bar first.
Okay. Yeah. You just need to.
You can see there is a perpendicular symbol.
Next to perpendicular symbol there is polar. So this
keep any of them as active.
No. Next to it. Yeah. Perpendicular one.
This is grid. No. Not this one. Yeah.
Correct. That one. Activate it.
Now. Now create copy. Now go there and then type
the value. That is one triple three point three three.
Then enter. Then escape and you will see
the object will be created there.
Copy. And then.
Yes. Yeah. Enter. Zoom out
little bit. Yeah. No.
Still not created.
Okay.
I think it's created but somewhere outside
maybe. Can you zoom out little bit?
Wait.
Yes. You can use the zoom
command.
What is the value
showing you? Yeah. Just click there in the middle.
Yeah. Just choose the middle
because it's strange that
it is not showing.
Millimeter spacing from the right top corner as shown below.
Okay. And
unit system.
This is again the existing project. Okay.
Now change this size for that member.
The one you placed. It should be S.
Then okay.
Now change the shape
to the shaded one to check whether this is fine
or not. Correct.
Now. Yes.
Now we can do it. Select it. Yes.
Now because the size is different now that's why.
But yeah. Go to the edit.
And then choose what you want. You want up.
Okay. Alright. Now you can make one more copy of
this object. Just make a random copy.
Because dimensions are
it's not taking those values. Yeah. And when asking for the base point
don't click on like on the existing object
or any object snap. It's better to click
on the outside or is already active.
No. Yeah. Go for a copy.
Yes. And then go this side. Yeah.
Keep going. Keep going. Keep going. Go somewhere in the middle.
No. Left side. It's too much now. No. No. It's too much.
Yeah. That is fine. Click. There you go.
Escape. You can check the style now. It will be
created. And on the other side you will create the beams
in the like perpendicular direction.
Yes.
Yes.
Yes. You can move it. You can move it.
Using the move command. Correct. That way.
Then click. There you go. Now create a copy of
Okay. Size is same. Just create another copy on right side.
Yeah. Keep moving. Keep moving.
Yeah. That's correct.
That's that's right.
Yeah. We should not like you can always click
in the blank area and the outside because inside
obviously it will pick the snap and then slowly
Yeah. That's fine now. Correct. Now change this
your visuals to shape
that is shape. Yeah. Correct.
That's fine now. And next option you will do
is there is another bracing. You can see the bracing has also
been placed in between columns. Right.
So you will choose the same number before that
go for the number settings. Now
change the member to
Yes. Yes.
Yes.
Select the items you want to change. You can use the
window selection because all of them are the structure only.
Yeah. Except this object.
Okay. Now change the layer. Just click on the layer.
And then choose
structure. Yes. Then escape.
Escape now. And then now your grid is also changed I guess.
Select the grid. Just click on the grid in the bottom.
Yeah. And then change to grid.
Yes. Correct. Now that's fine. Now
set the active layer as the structure layer so that
everything will automatically fall under that layer. Yes.
Now add those bracing numbers before adding
define the settings. Yeah.
Yes.
Now add from diagonal members. Yeah.
Yes.
From this corner. Yeah. Correct. This corner.
And this other corner.
Down there. Click. Just click. Yeah.
That way. Now hit escape.
And add another member. Same way.
Just choose the corner. That's okay.
Again. Yeah. Choose the corner. And the other corner
down there. Yes.
Correct. Now escape. And then fine.
One more.
Yes.
Nice.
Right. Now you will go for
where you will cut the members. Cut back the member tool.
So you can see in number
five it has asked you to
cut those members against each other.
So you will use that.
It's the next. Yeah. In cutting area. See.
Yeah. That is the cut back member.
Cut back member. Yeah. Then you will select
the column first. Zoom in. And you can see column
is there. Yes. Column. The vertical member first.
Because that is something I will prioritize member.
Then select the member we want to cut. Now select the
beam. Yes. Select this.
Yeah. Yeah. Actually we have to trim all of them.
Yeah. I think it might not be
intersecting with that. So now
first of all select the beam.
The beam. The secondary beam. Just click on the secondary beam.
No. This is a bracing. The horizontal.
Yeah. Yes. That's a good.
So no. First. Wait. Wait.
Listen to me. Okay. Escape.
Go for a trim again. Command.
Go to the command. Yes.
Now wait. First we need to select the
reference. The column is our reference. Select the column.
Now select the beam. Yes.
Click on it. And there you go. Now hit escape.
You will see it will be trimmed off accordingly. Yes.
It will trim it from the side. Shift middle mouse
button. No. It will not keep any
intersection actually because intersection cannot be
created in the structural member right.
Now.
No. If you want to cut the bracing then
your reference is going to be your beam.
Because it is intersecting with the beam directly. See.
Before intersecting with the column it is
intersecting with the beam. The horizontal beam. Yes.
Yes.
Yeah. Select it. No. But it will not
happen that way. Hit escape. Because we always
have to select. This is the one atom movement.
You can repeat the command.
Alright.
Yeah.
Yeah.
Yeah.
Yes.
So mitre is again you will select only
the beams. Two beams together. Left and right
beam. This one and this one. Yes.
Yes. This is my. Yes. There you go.
You can see the mitre. But this is not the right
choice actually to place it here. No. It is just
to understand because that column is penetrating inside. No.
So. Yeah.
But yeah you have got the concept that is
important.
That's OK.
That's fine. Yeah.
For settings you will again go to the settings drop down.
Yes. Well
we have the options as well while placing the
atom. You might have observed like for the member
as we are activating the member in the
command line window it used to give the option for
setting. So you are using
ladder. So ladder shape. You can define this shape now.
You can see this is DIN
shape type whichever you want to choose.
Yes. This is not here
in the list. This is a mistake actually. So choose W here.
Yeah.
AACW and 6 by 12.
Yes.
Yes. Then. Yeah.
Select.
Yeah.
That's fine.
Selected. Yeah. Selected.
X Y is already correct actually.
So after that this is done. Do you define the
setting for the cage. Right.
You can click on the cage now. Cage. Next to the
ladder. At the top. At the top. Next to the
ladder. Ladder. Next to ladder.
Go up there. Yeah. Cage. And there you can
specify the setting for your cage. Yes.
No. No. No. No need.
That's OK actually. Just to define a little distance.
We can keep our mouse toward outward direction
and then click. Or we can also type
while making this ladder. Now go for the ladder again.
And then. Yes. Now place it.
So you will select that point. The end point of the line at the
bottom. No. Start from the bottom.
Yeah. The end point of that red
line. No. Not this one. Not this one.
Not this one. The other one. Yes.
Now go up. Select the point where you are connecting
that. Up. Up. Up. Up.
At the top.
Yes. You can zoom in. At the exact
extreme top of this beam.
Yeah. But in this way
you will not be able to select it I guess.
Yeah. Yes. At the end point.
And now come down. Now come down
further distance. You just need to click
outside once.
You have not clicked. OK. Go for ladder again. That's OK.
Then select this point. And then select the point at the top.
Point. And then
come down to the first point again.
Close to first point. Now move your mouse toward right.
Right. Right. Not left. Right. Yes.
A very small distance. A very small distance.
Just click. Yeah. That's fine. Click again.
There you go. So this is how
you place the ladder. So that
small distance toward right.
That is actually to define your direction. Which direction you want to make
this ladder. Inside or outside. Yeah.
OK.
This is also done. Yes.
Now you will go for
the. Yes.
At the top you can place the railings.
Yes. Yeah.
Yes.
Yes. Now you will place it
at the top. You can see it's already shown in that figure.
So you just need to choose the point.
Just choose the random point on the top of your
beams.
Close to. No. Not from here.
Start where your ladder. Like where you have created the ladder.
At the left side of the ladder.
Close. Close to the ladder. Yeah.
Close to the ladder at the left side.
Yeah. You can zoom in more. Yes.
Now go toward left little more.
Then click here. Yeah. This is fine. Just choose that point.
Yeah. Just click. That's OK. Yeah.
Just click here. And then go toward left.
At the corner. Click at the end point. Yes.
Now go zoom out.
Zoom out. Yeah. That's fine. It will be created that way.
You can rotate or like orbit
your screen to check whether it is created on the right location or not.
It's not created. Yeah. Hit a skip and delete that. Yes.
Exactly. Change that shape. Delete it first.
The one you have created. Yes.
Change the shape to line. Yeah. Now start railing again.
You are doing it right. Now again
go toward close to that ladder. Huh.
At the right side as well.
So there is a gap. So you also need to close that.
Yes. Yes. Correct.
That's how you can do it. Now change the visuals.
And you will see that it will be created.
Correct. Now add the plates
at the top. We have not added the plates and grating.
Just add plate and grating. Yes.
Yes. No. No plate setting.
Because plate parameters are inside the command.
Yeah. Now you can specify.
Yeah. Correct. Just place it.
Yeah.
Rectangular is fine. Thickness is there.
Material. Tie plate. Okay.
Now you will place it
at the left side of that structure.
Choose the rectangle mode and then specify
the point. That's it.
New rectangle. Yes. Create.
And then choose the corners. Yeah.
Choose that corner here. Yes.
And click there. Yeah.
Just click. There you go. Now change the visuals.
You will see the shaded model there.
Right. Correct. And same way you can
place the grating. Now go for grating.
Change the visuals again.
Same. Same. Yeah. Plate.
So in type instead of plate you will choose grating.
That's okay.
It's just a part of plate. Yeah.
There you go. Great. Now in case you want to
change this grating like the scale.
You can see it's too dense. Right. So you can double click on the grating.
It will open the dialog box. The properties
window. And then scroll down.
And at last you have scale. You can increase decrease the value.
That way the grating.
Like the net. Yeah. Increase or decrease.
Yes.
So you can scroll down, scroll up.
There are lot of options available. Yeah.
Okay.
Yes. Anything. Just choose anything.
This is just to understand how to use. Yeah.
Great.
Alright. Already. Thank you.
You're welcome. You're welcome.
No, it's good. Yeah.
Okay. You're welcome. Thank you.
Anybody else guys?
I'm sure if you followed then
it's very pretty straightforward.
Yeah.
Anybody is having any question.
Please tell me.                

on 2024-11-23